Parge coat
The term ‘parge coat’ refers to the application of a thin coat of a cementitious or polymeric mortar to concrete or masonry walls.
Parging (or sometimes 'pargeting') is commonly used as a method for improving the thermal and acoustic performance of walls before before finishing them with a final surface such as drylining.
A parge coat can reduce air leakage through cracks, joints and porous wall constructions and so reduce energy consumption and improve comfort and acoustic performance. It can also be used to prepare a surface for a topcoat.
The parge coat is typically applied by hand, or by spraying, in a continuous coating with a minimum thickness of 6mm. As the walls are then finished with a subsequent top layer, it is not necessary to smooth the parge coat to a perfectly flat surface.
See also: Pargetting
[edit] Related articles on Designing Buildings Wiki
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
Where performance meets practice
The Building Envelope Stage at UKCW Birmingham.
CIAT publishes briefing on planning reforms.
Leaders in Learning for Practice Network
Call for conservation leaders in learning to register interest in new network.
The importance of early engagement
Construction lessons from the Trillium HealthWorks Experience Centre.
Mayors are to be given planning call in powers
Mayors across England will be able to make the most important planning decisions.
The Master Builder: William Butterfield and his times. Book review.
Why construction can't afford to ignore the skills gap.
Building Safety Regulator, 19 August
Gill Kernick appointed Independent Chair of Residents’ Panel.
Connecting knowledge, technology and conservation
Building competence for the future of built heritage.
Building Regulations and Building Safety Act
CIOB publishes free advice for non-domestic clients.
Building Safety Newsletter from MHCLG.
An extraordinary record of steel engineering worldwide.